Description INSTALLATION During the design, specific attention was paid to the depth of the box. Due to the shallow depth, the box can also be easily incorporated into façades of houses from the years ’50 and ’60 with often limited cavity space. Installation plan for assembly in existing masonry: 1. make a marking on the outer wall to the size of the built-in box 1 joint 2. remove the marked part from the wall and place the box. 3. adjust the box using adjustment cards. Then secure the box using expanding foam and then finish the box. Installation options: 1. Installation in existing masonry: for deep nest boxes, allow it to protrude slightly from the wall.Minimum 20mm PIR behind the nest box.Do not place the box against the insulation. 2. Flush with masonry: keep the box free of insulation. 3. Completely behind masonry: keep the box free of insulation.Mounting with corner anchors.Leave the stone a little wider than the entrance hole.The built-in box can be finished with stone strips or stucco.
